T4 T5 T150 T176/JEEP TO GM V8

Advance Adapter

This adapter bellhousing assembly is used to adapt the GM 4.3, V8 to the Jeep series SR4, T-4, T-5, T-150 & T-176 transmission. The bellhousing is used for both 4 cylinder and 6 cylinder applications.

The bellhousing kit includes a 356 T-6 aluminum bellhousing, universal dust cover plate, two pilot bushings with (.670″ or .590″) inside pilot diameter, ball pivot, fastening hardware, and adapter instructions.

Note: When replacing the 1980-86 Jeep 258 6 cylinders, the original clutch throw-out arm and throw-out bearing will be re-used. Or a Advance Adapters replacement GM arm P/N 716176 & bearing P/N N1714 can be used. All other Jeep CJ-7 applications will need the new throw-out arm and bearing.

Note: When replacing a 4 cylinder, you must change the throw-out arm and throw-out bearing. Use Advance Adapters P/N 716176 throw-out arm, P/N N1714 throw-out bearing, and P/N 716332 bellhousing boot..

Note: Don’t forget a new clutch cover, clutch disc and throw-out bearing. We have Centerforce clutch parts in stock and ready for your conversion!!!!

Note: Bellhousing does not fit Ford T5

Bill Of Materials

• BUSHING- PILOT .670 TIP GM CRANK / 716158
• BUSHING (STK. CHEVY) .590 / 716170
• BELLHOUSING- GM TO JP T4/T5/T176 / 712548-BLK
• BELL HOUSING INSPECTION COVER. FITS KITS 712548, 712549, 712576, 712577, 712580 / 712548-PLT
• H.H.C.S. 3/8 -16 X 1-1/4 (GR5) zinc / 723722
• BOLT 3/8 -16 X 1.25″ SHCS ZNC / 723730
• BOLT 5/16-18 X 0.50″ HHCS PLTD / 723123
• BALL PIVOT-AA BELL HOUSING / 716180
• SPRING CLIP FOR JEEP T/O ARM / 716184-A
• LOCK WASHER 5/16 PLATED / 723103