NP435 X JEEP DANA 300/NP231-23 TOOTH

Advance Adapter

The Ford NP435 4 speed manual adapter to the Jeep Dana 300 is 4.25″ in length. Adapter material is a strong 356-T6 heat treated aluminum alloy and the adapter has a provision for a transmission mount. The adapter kit includes a adapter housing, new NP435 output shaft, gaskets, seal, fastening hardware and adapter instructions.

Note: The adapter housing has been drilled to accept both 2wd & 4wd NP435 transmission cases.

Transfer case

The adapter assembly will fit the Jeep Dana 300. This transfer case was used in the 1980-’86 CJ-7 series. All 300s use a 23 spline female input shaft. Some of the adapters we manufacture include a new Dana 300 input with a different input spline. Therefore, if you obtain a Dana 300 from a salvage yard, please verify the input spline.

The Advance Adapter kit is designed to fit Jeep New Process 231, 242, 247, 249, and 2410 Rock-Trac transfer cases.

Transmission

The kit is designed for exclusive use with the Ford NP435 2wd & 4wd 4 speed manual transmissions. The NP435 cast iron case length is 10.875″ and has a aluminum top cover. It was used in Ford trucks from 1964-85.

Required Options

716021 Heavy Duty transmission mount. This Heavy Duty mount designed by us will provide years of reliability & strength.

Bill Of Materials

• SHAFT- NP435 TO D300 23T / 52-3800
• NP 435 TO JEEP DANA 300 ADAP. / 51-3800
• SEAL- 472319 / 716722
• GASKET-N.P.208 TRANSFER CASE / 716517
• 50-7500 BOLT PACK / 714202
• GASKET (NP435)(T18) / 716512