Katumo Gasoline Siphone Hose, Gas Oil Water Fuel Transfer Siphon Pump, Portable Widely Use Hand Fuel Pump, Fuel Transfer Pump With 2 Durable Pvc Hoses

Two Operating Ways For Use: ?Gravity Required: 1. The Source Fluid Should Be Higher 11 Inch Or More Than The Target One. 2. Connect The Hose To Both Ends Of The Rubber Pump. The Black Arrow On The Rubber Pump Point To Flow Direction. 3. Put The Input Side Of The Hose In The Source Fluid. Use The Hose Clips To Secure The Hose, Make It Won’T Flop Out Or Leak Fluid. 4. Squeeze The Hand Pump 3 Or 4 Times. 5.When Liquid Comes Close To Rubber Pump, Place The Outlet Hose In The Target Container. 6. When The Fluid Level Is Too Low At The Bottom Of The Source Container, The Pressure Will Not Enough To Keep Fluid Flowing Naturally, Then Need To Keep Squeezing The Rubber Pump To Finish The Pumping Job.?No Gravity Required: 1. Need To Squeeze The Rubber Ball Continually. 2. Have To Keep Pumping, Then The Flow Rate Can Be Controled. Self-Check Points When Siphon Pump Can’T Work Normally: 1. The Source Container Which You Want To Get Rid Of Fluid Is Placed Higher Than The Target One. 2. Both Of The Source Container And The Target One Are Not In A Sealed State. 3. The Two Hoses Are In Correct Sides, The Longer One Is Installed To The Input End Of The Rubber Pump, The Shorter One Is To The Outlet End.4. The Indicator Arrow Which On The Rubber Pump Towards To The Oulet End, Down To The Target Container.5. Both Of The Hoses Are Not Knotted Or Twisted Together. 6. Exhaust The Gas Out From The Hoses Before Using. 7. Keep The End Of The Two Hoses Inside Of The Containers During Using, Not Just On The Surface.Please Note: 1.If The Siphon Pump Hoses Have Kinks, Please Try To Soak The Kink Part Into A Small Amount Of Hot Water For 1-3 Minutes To Restore It, Then Will Not Affect The Use Of Function. 2. Not Suitable For Drink Water, Salt Water And Any Chemical Liquids.Package Includes: 1X Hand Pump 2 X Hoses 2 X Metal Clamps