700R-4 TO JEEP QUADRA-TRAC

Advance Adapter

Our GM 700R-4 adapter to the Jeep Borg Warner Quadra-Trac transfer case is 1.00” in length. The overall length of the new combination is identical to the TH400 assembly that is being replaced. Our kit will include a adapter plate, spud shaft, bearing, snap ring, gasket, o-ring, fastening hardware, and adapter instructions.

The original Quadra-Trac 4wd adapter housing must be retained.

Transfer Case

The adapter assembly fits the Jeep BW-1339. This is the original Jeep Quadra-Trac. This Borg Warner transfer case was introduced into the Wagoneers and trucks for the 1973 model year and lasted through ’79 model year. If found it’s way into the CJ-7 line from 1976-79 as an option. It’s an aluminum case, chain driven, full-time 4wd with a right-offset rear output.

Transmission

This kit is designed for exclusive use with the 4wd 700R-4 / 4L60 / 4L60E manufactured thru 1996. The overall case length of the transmission is 23.375”, has a non-removable bell housing, and a 4 bolt square rear case. Late model 4L60E automatics will have a removable bell housing and a 6 bolt hex pattern rear case. The late model automatic will require an additional Advance Adapter to work with this kit.

Bill Of Materials

• SPEC.BRG. 308 OD X 307 ID (35X90X20) / 716307
• SHAFT- 700R4 to QUADRATRAC SPUD / 52-2501
• 700R REPL. TH400 TO QUADRATRAC / 51-6902
• H.H.C.S. 3/8 -16 X 1-1/4 (GR5) zinc / 723722
• LOCK WASHER 3/8 ZINC / 723704
• GM T400/4L80E 862-4709 GASKET / 716510
• SNAP-RING EXT, INPUT-SHAFT GEAR / 716453
• 10mm-1.5THR X 40mm S.H.C.S. black oxide / 720046
• GM AUTO TRANSMISSION O RING / 716511