Fit Kawasaki Vulcan 1500 Nomad/Classic/Classic Fi/Classic Tourer/Vn-15, Vulcan 1500L ; Led Rear Lamp Brake Tail Light +Integrated Turn Signal Function (Smoke)

Led Taillights Brake Tail Light With Integrated Turn Signal Lamp Indicators For
Kawasaki
1996-2003 Vn400-C Vulcan Classic;
1996-2005 Vulcan 800 Classic;
1996-1999 Vn1500 Vulcan 1500;
1996 -2008 Vulcan 1500 Classic/ Vn1500 Classic;
2000-2002 Vn1500 Classic Fi;
1996-1997 Vn1500 Vulcan 1500L;
2000-2004 Vulcan 1500 Classic Tourer;
1999-2004 Vulcan 1500 Nomad / Normad Fi;
1987-1995 Vulcan 88

Upgrade The Taillight On Your Motorcycle With An Integrated Led Taillight With Turn Signals.
Running Light / Position Light : Red Color
Stop Light / Brake Light : Red Color More Powerful When You Are Braking
Integrated Turn Signals Indicators : Amber Color On Each Half Of The Taillight (Wires Are Independent)
To Slow Down The Blinking Rate Use Provided Resistors If Necessary:
Wiring Diagram Applicable To Most Bikes:
Black Wire(Negative),
Green Wire(Brake)
Red Wire(Running Light)
1. Connect One End Of The Resistor To The Ground Wire On Your Turn Signal Harness From Your Bike.
2. Connect The Other End Of The Resistor To Both The Yellow Wire From Our Taillight And The Positive
Turn Signal Wire From Your Turn Signal Harness From Your Bike.
3. Repeat The Same Process For The Other Side. To Use The Red Connectors, Place One Wire Inside Along One Channel, Place Another Wire Inside Along The Other Channel. Push Down The Metal Pin As It Will Make A Small Cut On Each Wire Bridging The Connectors.
If You Are Using The Resistors, Place One End Of The Resistor In The Middle Of Either Channel Along With The One Wire.