Remote Battery Disconnect Switch, Dc12V 120A/200A Anti Theft Upgrade Kill Switch For Car With Dual Remote Control, Prevent Battery Drain Battery Cut Off Switch For Car, Rv, Truck, Boat, Marine(200A)

How To Use:
Installation Method:
1: The Red Wire Is Connected To The Positive Pole Of The Battery, And The Black Wire Is Connected To The Negative Pole Of The Battery. This Is The Power Supply For The Switch, And The Remote Control Switch Consumes Very Little Power.
2: The Two Large Terminals On The Relay Switch Are The Main Switch. One Incoming Line And One Outgoing Line, In No Particular Order, Play The Role Of On Off.
3: When Controlling The On Off Of The Negative Pole, A Large Terminal Is Connected To The Negative Pole Of The Battery, And A Large Terminal Is Connected To The Negative Pole Of The Battery (The Positive Pole Is Also The Same).
Specification:
Item Type: Remote Battery Disconnect Switch
Material: Abs, Copper, Silver
Battery Model: Cr2016 X 1 (Built In)
Battery Capacity: 75Mah
Working Voltage: Dc11-15V
Rated Current: 120A-200A
Starting Current: 200A-360A (Less Than Ten Seconds)
Standby Current: 0.005A
Switch Size: Approx. 45 X 45 X 45Mm/1.77 X 1.77 X 1.77In
Package List:
2 X Remote Control
1 X Main Power Switch
1 X Copper Terminal
2 X Battery Clip
1 X Copper Adapter
Note:
After Installation, When The Relay Switch Is Turned On, The Battery Power Consumption Will Be Increased. When Leaving The Car, The Main Power Supply Should Be Turned Off With The Remote Control In Time, So As To Avoid Power Loss Due To Excessive Power Consumption And Failure To Start.