T18 X TOYOTA TRK 23 TOOTH

Advance Adapter

The Ford T-18 4 speed manual adapter to the Toyota Truck gear driven transfer case is 3.50″. The adapter material is 356 T-6 heat treated aluminum alloy. Our adapter kit will include a adapter housing, new T-18 output shaft, 27×23 coupler, nylon bushing, cover plate, gaskets o-ring, seal, fastening hardware and adapter instructions.

Transfer Case

The adapter assembly fits the Toyota Truck 23 spline gear driven transfer cases. This transfer case has a male 23 spline input shaft and can also be identified by 7 bolts attaching the tailhousing to the transfer case.

Transmission

This kit is designed for exclusive use with the Ford T-18. The Ford version of the T-18 was used from 1967 until 1984 model years and was used in 2wd & 4wd truck applications. It’s a heavy duty 4 speed with a cast iron case and top cover. The case length is 11.187″ and on the driver’s side of the case will be casting number of T-18 or 13-01 with a PTO cover plate found on the passenger side and/or driver’s side. 2nd through 4th gears are synchronized with 1st and reverse gears non- synchronized.

Bill Of Materials

• TOY PU.T/C TO T18/NP435 and retainer / 51-5800
• COUPLER- GM 27 TO TOYOTA 23 / 52-6201
• SHAFT- T18 4 SPEED-UNIV SPLINE / 52-7700
• COVER / 711140-I CASTING / 716063
• SLEEVE- TOYOTA 23SP SEAL / 716289
• SEALED BEARING 209RS / 716308
• SNAP RING (T350 / T400) / 716450
• TRUE ARC SNAP RING HO-315STPA / 716456
• GASKET (NP435)(T18) / 716512
• TOYOTA TRK T/C GASKET 84 and UP / 716564
• SEAL FOR TOYOTA 23 SPL INPUT / 716712
• S.H.C.S. 8mm X 1.25 X 20mm black oxide / 720040
• S.H.C.S. 1/2 -13 X 1-1/4 / 725025
• 1/2 -13 X 1-1/4 H.H.C.S. / 725029